.svg "Logo (2)"){kind=small}
The temperature is factory set. If wishing to change this setting, go through the following procedure.
-
Press the button (1) until the display is flashing the current set point value.
-
Press the button (2) to increase the value or press the button (3) to decrease it.
![[Note]](https://knowledgebase.eversys.com/app/assets/paligo/images/note.png)
Note We recommend to set the value to 4°C (39°F) maximum. If making cold milk foam the recommended temperature is 0.5 - 4°C (32.9 - 39°F). Always fill the milk tank with pre-cooled milk.
-
Press again the button (1) to set the value.
