Operator stop messages for Legacy+ (S-XXX)

Operator stop messages for Legacy+ (S-XXX)

	Note
	If the message persists, please contact your service organization.

Number	Infos messages	Explanations / Remedies
S-000	Initialize, please wait...	Wait until the initialization has finished.
S-001	Coffee boiler is heating...	Wait until the coffee boilers has reached their nominal temperature (both coffee boilers are heating after an initialization and if machine has been switched on from main isolator switch, once the cold flush has completed).
S-002	Bean hopper 1 missing	Check if the bean hopper 1 is inserted correctly.
S-003	Bean hopper 2 missing	Check if the bean hopper 2 is inserted correctly.
S-004	Please empty the grounds drawer.	The grounds drawer must be emptied before the cleaning can be started.
S-005	Risk of injury! Please empty the grounds drawer carefully. The grounds drawer was filled with hot water during cleaning.	During the cleaning, the grounds drawer is being filled with water.
S-006	Grounds drawer is full.	The grounds drawer has to be emptied.
S-007	Please insert the grounds drawer.	The grounds drawer out time elapsed → When the grounds drawer is inserted now, a message box appears asking if the grounds drawer has been emptied (YES or NO).
S-008	Please insert the grounds drawer.	The coffee machine can only continue if the grounds drawer is inserted.
S-009	Grounds drawer missing.	The sensor has detected that the grounds drawer is missing.
S-010	Bean hopper 2 is empty or locked. Please refill or unlock the bean hopper.	The brewing module has detected no coffee powder in the chamber. The bean hopper 2 has to be refilled or unlocked.
S-011	Bean hopper 1 is empty or locked. Please refill or unlock the bean hopper.	The brewing module has detected no coffee powder in the chamber. The bean hopper 1 has to be refilled or unlocked.
S-013	Coffee quantity too high (last product on the left side).	-
S-014	Rinse necessary. The coffee boiler isn't allowed to heat before the machine is rinsed.	Press the rinse key in the upper right corner.
S-016	The coffee machine has been cleaned without cleaning balls. Coffee cleaning ball dispenser empty? Blocked or broken coffee cleaning balls?	Check if the cleaning ball dispenser is empty. If yes, refill it. Maybe new cleaning balls have to be ordered. → Check if a cleaning ball is blocked or broken. The coffee machine is blocked now until the next cleaning with cleaning balls!
S-017	Cleaning necessary. Please press Continue to start the cleaning.	No coffee products can be produced until a cleaning is performed. → Press and hold the rinse key for three seconds to start the cleaning.
S-018	The last cleaning hasn't been finished correctly. Please press Continue to start the cleaning.	The cleaning cycle has been interrupted. → Check if the operator has removed the bean hopper during the cleaning process → A new cleaning has to be started again.
S-020	Brewing unit failure. The brewing unit is blocked. => Please check the brewing unit.	This warning is set, if the brew unit is blocked. E.g. if both sides are blocked or the brew chamber of one side blocks the other side.
S-021	Grounds bin is full. Please empty the grounds bin and press Continue.	Empty the grounds bin and press the button.
S-023	Cleaning required. Please wait until all boilers are ready.	No action necessary.
S-024	Refit the milk bladder. Remove and clean the milk cleaning container.	Clean the milk tubes with a damp cloth. → Remove and clean the milk cleaning container.
S-025	Grounds drawer is full. Please wait until the running product has finished... Empty the grounds drawer as soon as the running product has finished.	Grounds drawer is full. Please wait until the running product has finished.
S-026	Remove milk from fridge. Place milk tubes inside cleaning container. Close lid and place the container in the fridge.	Remove the milk tank. Fill the empty cleaning tank with 25ml Everclean (press pump once). Press Continue.
S-027	Interface not detected. All products are locked. Please check the interface connection and setting.	This message only occurs if you use an external interface (CSI or CCI).
S-028	The milk system has been cleaned without detergent. The coffee machine is blocked now until the next cleaning with Everclean!	The coffee machine is blocked now until the next cleaning with detergent!
S-030	Source water tank empty. Please refill source water tank.	Reed switch has detected that the source water tank is empty. → Refill the source water tank.
S-031	Waste water tank full. Please empty waste water tank.	Reed switch has detected that the waste water tank is full. → Empty the waste water tank.
S-032	Milk unit not connected. Water pump has been switched off.	-
S-033	Display open. Please close the display properly.	Check if display is closed properly. → Check reed switch and cable.
S-034	Level of Bean Hopper 1 too low. Please refill or unlock the bean hopper.	Light barrier of bean level control has not detected beans in Bean Hopper 1. → Refill bean hopper.
S-035	Level of Bean Hopper 2 too low. Please refill or unlock the bean hopper.	Light barrier of bean level control has not detected beans in Bean Hopper 2. → Refill bean hopper.
S-036	Have you refilled the source water tank?	Have you refilled the source water tank?
S-037	Have you emptied the waste water tank?	Have you emptied the waste water tank?
S-038	Please empty waste water tank.	Please empty waste water tank.
S-039	Please replace the grounds drawer with the red one.	The grounds drawer must be replaced with the red one before the cleaning can be started.
S-040	Risk of injury! Please empty the red grounds drawer carefully. The grounds drawer was filled with hot water during cleaning. Replace the red grounds drawer with the normal one.	During the cleaning, the red grounds drawer is being filled with hot water and needs to be replaced with the normal one.
S-041	Open powder unit and remove the mixer with pipe (A, B, C). Remove the chutes (D). Clean all parts under tap water and dry them. Put back the chutes, the pipe and the mixer (D, C, B, A). Close the powder unit.	Open powder unit and remove mixer. Clean and dry the mixer. Put the mixer back and close powder unit.
S-042	Take cleaning container. Fill the empty cleaning tank with 25ml Everclean (press pump once). Place container under coffee outlet.	Take cleaning container. Put two cleaning tablets inside. Place container under coffee outlet.
S-043	Cleaned without milk cleaning balls. Milk cleaning ball dispenser empty?	Check if the cleaning ball dispenser is empty. If yes, refill it. Maybe new cleaning balls have to be ordered. → Check if a cleaning ball is blocked. The coffee machine is blocked now until the next cleaning with cleaning balls!
S-044	Check milk cleaning ball dispenser. Blocked or broken cleaning balls? Light barrier dirty?	The machine has been cleaned 10x without a milk cleaning ball! → Check if a milk cleaning ball is blocked or broken The coffee machine is blocked now until the next cleaning with milk cleaning balls!
S-045	Drip tray is missing.	-
S-046	Don't remove the milk tubes from milk container! The milk in the tube will be pushed back.	At start of cleaning the milk in the tube(s) is pushed back to milk container.
S-057	Bean hopper 3 missing	Check if the Bean Hopper 3 is inserted correctly.
S-058	Bean hopper 4 missing	Check if the Bean Hopper 4 is inserted correctly.
S-059	Bean hopper 3 is empty or locked. Please refill or unlock the bean hopper.	The brewing module has detected no coffee powder in the chamber. The bean hopper 3 has to be refilled or unlocked.
S-060	Bean hopper 4 is empty or locked. Please refill or unlock the bean hopper.	The brewing module has detected no coffee powder in the chamber. The bean hopper 4 has to be refilled or unlocked.
S-061	Level of Bean Hopper 3 too low. Please refill the bean hopper.	Light barrier of bean level control has not detected beans in Bean Hopper 3. → Refill bean hopper.
S-062	Level of Bean Hopper 4 too low. Please refill the bean hopper.	Light barrier of bean level control has not detected beans in Bean Hopper 4. → Refill bean hopper.
S-063	Milk detected during the cleaning, machine is blocked until cleaned with an empty tank.	-
S-064	Milk cleaning could repeatedly not be performed due to a leak in the milk cleaning ball dissolving chamber. Contact a technician.	Clear dissolving chamber of all residue/debris.
S-106	Initialize, please wait...	Just wait until the coffee machine is initialized.
S-109	Display open. Please close the display properly.	Check if display is closed properly.

visibility-public, visibility-restricted-us, visibility-restricted, filter-machines-legacy, topic-operating, category-legacy

Popular posts

Cameo range user manuals

Cameo range datasheets

Operator warning messages for Cameo (W-XXX)