Enigma water specifications

	Note
	Use the new hose sets provided with the appliance. Do not reuse old hose sets.

Description	E'2c	E'2s \| E'2ms \| E'4s \| E'4ms \| E'4s x-wide \| E'4ms x-wide	E'6s \| E'6ms
Inlet hose	1 x inox braided pipe G3/8" female x 2 m (78.7 in)	1 x inox braided pipe G3/8" female x 2 m (78.7 in)	2 x inox braided pipe G3/8" female x 2 m (78.7 in)
Drain hose	1 x Hose (Ø 22 mm x Ø 16 mm x 2 m) (Ø 0.9 x Ø 0.6 x 78.7 in)
Siphon inlet	min. Ø 56 mm (2.2 in)
Pressure	2.5 - 4 bars (36.3 - 58 psi). If the pressure exceeds 4 bars (58 psi), it is necessary to install a pressure valve reducer.
Flow rate	To avoid damage to the water pump, a water flow rate of at least 2.5 L/min (0.6 gal (UK)/min - 0.7 gal (US)/min) \| 150 L/h (33 gal (UK)/h - 39.6 gal (US)/h) must be ensured at the water inlet of the machine.	To avoid damage to the water pump, a water flow rate of at least 3.4 L/min (0.8 gal (UK)/min - 0.9 gal (US)/min) \| 200 L/h (44 gal (UK)/h - 52.8 gal (US)/h) must be ensured at the water inlet of the machine.	To avoid damage to the water pump, a water flow rate of at least 3.4 L/min (0.8 gal (UK)/min - 0.9 gal (US)/min) \| 200 L/h (44 gal (UK)/h - 52.8 gal (US)/h) on the left hand side and 2.5 L/min (0.6 gal (UK)/min - 0.7 gal (US)/min) \| 150 L/h (33 gal (UK)/h - 39.6 gal (US)/h) on the right hand side must be ensured at the water inlet of the machine.

Description	E'2c \| E'2s \| E'2ms \| E'4s \| E'4ms \| E'4s x-wide \| E'4ms x-wide \| E'6s \| E'6ms
Total hardness	5 - 8° dGH (89-142 ppm)
Carbonate hardness	max. 6° dKH (107 ppm)
pH value	ideal 7.0 - 7.2
Chlorine (Cl)	max. 0,1 mg/L (0,1 ppm)